Roller gear cam and turret

This cam is a solid cam. Number of stops: from 1 to 30.
The range of the index period is wide. The wider, the better. The backlash can be reduced due to being pressurized easily.
The axis-to-axis distance available: from 32mm to 350mm.
 Parallel cam and turret

This cam is a plane cam. Number of stops: from 1 to 16.
The input and output shafts are arranged parallel. The faster rotation is possible when compared to the Genava mechanism arranged in the same manner. The backlash can be reduced due to being pressurized easily.
The axis-to-axis distance available: from 40mm to 400mm.
 Barrel cam

This cam is a solid cam. Number of stops: over 6, those of 48 and 60 are also available.
The range of the index period is wide. The wider, the better.
The outside diameter available: 2000mm.
OR OP P&P ATC Index cam General cam Resolver Cam switch Automated machine
To Roller gear cam index unit To Parallel cam index unit To Pick & place unit To ATC unit To General cam To Resolver To Cam switch To Automated machine
[Return to Introduction of Products] [To Company Profile] [Return to Home Page]